Check gases and LELs and vent if necessary. If solids are present, we would remove those via shovel, squeegee, pressure washer and hose. Clean to desired level. Unload in high or low sided catch bin for fly ash to be mixed.
Sand Traps:
Check gases and LELs and vent if necessary. If solids are present, we would remove those via shovel, squeegee, pressure washer and hose. Clean to desired level. Unload in high or low sided catch bin fly ash to be mixed.
Gas Buster:
Use a 4" hose and vac out the bottom of the buster via the bottom connection.
Rig Mats:
Pressure wash rig mats.
Rig Clean:
As the rig is being disassembled we can pressure wash and clean parts for inspection.
Pre-mix Tanks:
Holding tank...Pressure wash to desired cleaning level. If solids are present, we would remove those via shovel, squeegee, pressure washer and hose (4"-6"). Then Vac out hopper.
Cellar Cleanout:
Use a 6" hose to clean out the cellar to desired depth and cleanliness.
Mouse/Rat Hole:
Use 4" hoses and slowly lower down mouse hole and vac out fluids. Take to disposal or dump on site in reserve pit..
Flat Tank:
Pressure wash shaker, mixing bins and debri bins. If solids are present, we would remove those via shovel, squeegee, pressure washer and hose (4"-6").